What the P3 Syllabus Expects
Diversity of materials is one of the first topics in the Singapore Primary 3 science syllabus. Children learn about seven common materials: wood, metal, ceramic, rubber, glass, plastic and fabric. They compare the physical properties of these materials and relate the uses of each material to its properties. The syllabus names five properties to compare: strength, flexibility, the ability to float or sink in water, whether a material is waterproof, and transparency. It also explains what each of these words means at P3, and this lab uses exactly those meanings, so that what children practise here matches what they meet in class and in school papers.
- Strength is the ability of a material to hold a load without breaking. In the lab, each strip is laid across a gap and loaded with weights until it breaks.
- Flexibility is the ability to bend without breaking. In the lab, each strip is clamped to a block and pushed down at its free end.
- The ability to float means whether an object stays on or near the surface of the water and does not sink. The syllabus says the idea of density is not required, so children simply observe and record.
- Waterproof means that a material does not absorb water. In the lab, five drops of water are dropped on each strip: on a waterproof strip the water stays on top; on cotton cloth it soaks in.
- Transparency means whether a material allows most, some or no light to pass through. The syllabus says the words transparent, translucent and opaque are not required, so the lab uses the syllabus wording: most light, some light, no light.
The syllabus also asks children to use data to back up what they say about materials. That is why every result in this lab must be recorded in a table before it counts, and why the missions ask children to choose a material and then pick the reasons from their own results.
How to Use the Lab
Choose a test station with the buttons at the top of the bench. Drag a strip of material onto the station, or simply tap it, then press the green button to run the test. Watch carefully, then record what you saw by choosing one of the answers in the orange box. If the answer matches what happened, it goes into the results table with a tick. If not, Capy asks you to look again. The lab missions give three stars when every result in a column is recorded right the first time, so it pays to watch closely rather than guess. The float tank works with ten everyday objects instead of strips: drag or tap an object to drop it into the water, then record whether it floats or sinks.
Once a column is full, the job missions use it. Capy needs a raincoat, a window, a raft, a toy bridge and a towel. For each one the child chooses the best material from four, using the table, and then ticks every reason that is true. The two fair-test missions ask what should be changed and what should stay the same in an experiment, and which of three tests is fair. The revision quiz at the bottom mixes all of these ideas into short rounds of five or ten questions.
The Results in This Lab
The strips in the lab are all the same size, so the results can be compared fairly. These are the results the lab gives. Real materials vary (a thick metal bar does not bend as easily as a thin strip, and painted wood behaves differently from bare wood), so talk about what your child expects before testing real objects at home.
| Material (strip) | Light that passes through | Bends without breaking? | Weights held | Waterproof? |
|---|---|---|---|---|
| Wood (bare wood) | No light | No: it snaps | 7 | No: it absorbs water |
| Metal (thin strip) | No light | Yes | All 10 | Yes |
| Ceramic (glazed tile) | No light | No: it cracks | 1 | Yes |
| Rubber | No light | Yes | Too floppy to test | Yes |
| Glass (clear) | Most light | No: it breaks | 2 | Yes |
| Plastic (clear) | Most light | Yes | 4 | Yes |
| Fabric (thin cotton) | Some light | Yes | Too floppy to test | No: it absorbs water |
In the float tank, the wooden block, the ice-cream stick, the hollow rubber ball, the plastic bottle cap and the metal foil tray float. The metal spoon, the paper clip, the glass marble, the ceramic tile and the rubber eraser sink.
Fair Tests at P3
A fair test changes only one thing, the thing we want to find out about, and keeps everything else the same. In every station of this lab, the material is the one thing that changes. The strips are the same size, the torch is the same distance away, every strip gets the same push, the same five drops of water and the same one-minute wait. If Capy used a thick wooden strip and a thin plastic strip, he could not tell whether the wood held more weights because wood is stronger or simply because it was thicker. Children often find it easier to spot an unfair test than to plan a fair one, so the “Spot the fair test” mission shows three ways of testing and asks which one is fair. At home, keep asking: “What are we changing? What must stay the same?”
Common Misconceptions
- “Metal always sinks.” A metal spoon and a paper clip sink, but a thin metal foil tray shaped like a boat floats, and so do huge metal ships. Whether something floats depends on the whole object, so we always say which object we tested.
- “All plastic floats.” A plastic bottle cap floats, but some plastic objects sink. Test before you decide.
- “Rubber always floats.” A hollow rubber ball, with air inside, floats. A solid rubber eraser sinks.
- “Waterproof means water cannot get through.” In the P3 syllabus, waterproof means the material does not absorb water. Absorbing water and being waterproof are opposites: a towel is useful because it absorbs water; a raincoat is useful because it does not.
- “Glass is strong because it is hard.” Glass lets most light pass through, which is why it is used for windows, but a thin glass strip breaks when it is bent or loaded. Being hard is not the same as being strong or flexible.
- “Fabric lets all light through.” Thin cotton cloth lets some light pass through, not most, so a room with thin curtains is dimmer but not dark.
- “The best material is the strongest one.” The best material depends on the job. A raincoat needs to be waterproof and flexible; a window needs to let most light pass through.
Hands-On Activities for Home
- Torch test. In a dim room, shine a torch through a glass jar, a plastic file, a sheet of paper, a handkerchief and a wooden spoon onto a wall. Sort them into most light, some light and no light.
- Sink or float hunt. Fill a basin and test ten objects from around the house. Predict first, then test, then record in a two-column table. Look for two objects made of the same material that do different things.
- Drip test. Use a spoon or a dropper to put the same number of drops on a plastic bag, a cotton sock, a kitchen sponge, a metal tray and a rubber glove. Wait one minute and look: did the water stay on top or soak in?
- Material hunt. Walk around the kitchen and list objects made of each of the seven materials. For each, say one property that makes the material right for that job: a metal pot, a ceramic plate, a glass cup, a rubber mat, a plastic box, a wooden chopping board, a cotton tea towel.
- Fair or not? Describe a test with one mistake, such as using more water on one cloth than another, and ask your child to find what is unfair.
Tips for Parents and Teachers
Ask children to say their result out loud before they tap it in the table: “Most light passes through the glass strip.” Full sentences in the syllabus wording help in written answers later. When a child chooses the wrong material in a mission, ask them to look at the table row for that material and say which property is missing. For classroom use, project the lab and let groups predict each result on mini whiteboards before one child runs the test. Older or more confident children can explain why each wrong option in a job mission would not work, which is good practice for open-ended questions.
Everything on this page stays on this device. Each child’s results table and stars are kept under their own name, which is chosen on the homepage, and nothing is uploaded.